Direct Push Units
Portable Units
The Direct Push remote probe unit capable of being placed indoors, in basements (down stairs or elevators), or in other areas of limited access. The remote unit is hydraulically powered and is connected to either an ATV-mounted probe unit or a propane/gas powered hydraulic power pack. The remote probe units consist of three separate components, a modified Direct Push mast and hammer assembly, a removable base/anchoring plate and a hydraulic power pack. Each of these components can be moved to areas of limited access and reassembled. Although this unit can provide a tremendous amount of flexibility, it must be noted that achievable depth will be directly related to subsurface conditions and each site must be considered separately.Remote Unit In Action |
| Weight: 400 lbs. Width: 32in. Length(folded): 60in. Height(folded): 16in. Height(extended): 108in. |
 |
Direct Push Track Units (6620DT and 7720DT)
Direct Push track units are rugged, compact and mobile. These units are meant for rough, tight and congested areas. They work in less-than-perfect conditions such as mud, soft sand and shallow water.
|
6620DT Track Specs |
| Weight: 6,100 lbs. Width: 60in. Length(folded): 96in. Height(folded): 89in. Height(extended): 153in. 35,000 lb. Down Force 47,000 lb. Retraction Force |
 |
Direct Push Track Units (54DT)
Direct Push track units are rugged, compact and mobile. These units are meant for rough, tight and congested areas. They work in less-than-perfect conditions such as mud, soft sand and shallow water.
|
Track 5400DT Specs |
| Weight: 3,700 lbs. Width: 48in. Length(folded): 92in. Height(folded): 65in. Height(extended): 123in. |
 |
Truck Mounted
Over the years, the conventional truck mounted Direct Push unit has proven itself as a versatile all around productive unit. The "plain white wrapper" (no external marking other than our stripe) keeps a low public profile on site and the large cargo areas are useful for sampling, grouting and injections supplies.
Truck Mounted 6620DT In Action |
|
Weight: 7,416 lbs. |
 |
ZEBRA Mini Track
The Mini Track Unit is Case Unit is ideal for limited access projects such as dense woods, off-road areas and standing water. It's small enough to fit into small places, but can provide heavy-duty probing just like any truck-mounted unit.
|
Mini Track Specs |
Weight: 2,000 lbs. Width: 35.5in. Length(folded): 96in. Height(folded): 69in. Height(extended): 123in |
 |
ZEBRA VACMASTER 1000
The VACMASTER Unit is ideal for locations with buried utilities, marked or unmarked, can be both very dangerous and very costly. Hand augering when working around buried utilities has been common practice for a long time but it isn’t always feasible because of buried cobbles, debris, or other hard subsurface conditions. Today many major petroleum companies are requiring their contractors to follow new safety protocols at their jobsite's. Vacuum Excavation is the answer for corporations and government entities wishing to drill safely, cost effectively, and limit their liability.
|
Zebra Vac Ex Truck Specs |
Weight: 16,780 lbs. Vac Power: 15 in. Mercury Width: 72in. Length: 13ft. |
 |
